Built In Britain
Medium Panel Van Road Only
Introducing The Medium Panel Van Unit
The A300 range of refrigeration systems from GAH offers various options for operators requiring temperature control during the delivery of chilled or frozen goods in medium to large suitably insulated panel vans where mains electric standby is not required.
The stylish aerodynamic design utilises plastic covers for the condenser cover and base with an optional plastic covered evaporator making this one of the most efficient and flexible units in its class.
A vehicle engine driven compressor powers the units. Compressor mount kits are available for a wide variety of vehicles,
An in-cab controller with digital display monitors and controls the temperature and defrosting whilst providing a constant load space temperature readout.
Features & Benefits
Chill models are easy to operate with off cycle defrost. Perfect for delivering chilled packaged goods.
Freeze models are easily set to the desired temperature. All functions are fully automatic. For applications with very high drop rates, see large Panel Van.
All A300 systems with defrost can be programmed to run at a specific temperature for instance, set to 5°C and if the ambient is high the unit will cool down to 5°C but, if the ambient is low the unit will heat to 5°C.
Approximately 54 kg installed making this unit the lightest in it's class and allowing the operator to carry more product.
Supplied as standard with the choice of a slimmer plastic variant if required.
For a bespoke freeze and chill application in two separate bespoke compartments please talk to an applications specialist regarding the R300 Dual evaporator systems
All A300 systems with defrost can be programmed to run at a specific temperature for instance, set to 5°C and if the ambient is high the unit will cool down to 5°C but, if the ambient is low the unit will heat to 5°C.
Whilst cooling the load space, moisture in the air collects on the evaporator coil. GAH chill units have an automatic, hourly off cycle defrost to keep the coils free of frost. GAH freeze units have hourly, automatic and fast reverse cycle defrost for closer temperature control which allows the unit to cool for more minutes per hour.
Technical Specification
Below are the standard options for this refrigeration system. If you require something different, please call GAH on 01394 421140 to discuss your requirements with an application specialist.
| Type | Chilled | Frozen | Heat-Cool | Flexi | VLA |
|---|---|---|---|---|---|
| Road Only |
Applications & Compatabilities
Please note these guides are offered as an approximation only. For confirmation and a more detailed quotation, please contact one of our application specialists.
The A300C is a chill only system, the A300F is for frozen applications or chill applications where a full defrost is required. The choice can be affected by the product to be carried and the number of door openings per working day and the way the system is used. If in doubt, please talk to a GAH Applications specialist for clarification.
The following assumptions have been made:
- Ambient temperature 30°C
- Chilled ‘K’ Factor is 0.7 W/M²/°C
- Frozen ‘K’ Factor is 0.4 W/M²/°C
- Drop duration is 3-5 minutes
Medium Panel Sized Vehicles (6-8m³)
Chilled (0–3°C) up to 4 drops per hour
(32 in an 8 hour day)
Frozen (–18°C) up to 3 drops per hour
(24 in an 8 hour day)
Medium Panel Sized Vehicles (8–10m³)
Chilled (0–3°C) up to 4 drops per hour
(32 in an 8 hour day)
Frozen (–18°C) up to 2 drops per hour
(16 in an 8 hour day)
Fresh Food
Frozen Food
Heat/Cool Applications
Water Samples
Blood/Plasma
