Built In Britain
Box Body Panel Pharma
Box Body Panel Pharma
The GAH Flexi-temp allows two insulated compartments to be heated or cooled simultaneously giving fully flexible and more precise temperature in either compartment. Previously, it was possible to heat or cool the compartments sequentially, but you would have to prioritise the temperature in one compartment and the compressor would work continually to balance temperature in both compartments.
The Flexi-temp system eliminates the need to prioritise compartments. It allows you to heat or cool by absorbing and dissipating heat from any of its three heat exchangers, giving up to 3.5KW of heating or cooling.
Flexi-temp was developed initially for transporting Pharmaceuticals, which require differing temperatures for all products, however, because it can heat or cool from 25°C to -25°C in either compartment, it is ideal for specialist couriers and spot hire companies.
Features & Benefits
Flexi-temp can heat, cool or freeze in either of the two compartments by simultaneously absorbing or dissipating heat from any of its three heat exchangers, Two internal and one on the outside of the load space giving up to 3.5 KW of heating or cooling.
The GAH FlexiTemp uses a high capacity, single phase, eco friendly scroll compressor when on standby. No drive belts to adjust, hermetically sealed and very quiet.
Whether on truck drive or standby, in heat and cool mode, the compressor runs for less time (using less fuel or electricity) because it can simply move heat from one compartment to another compared to a traditional system that cools one compartment (dissipating the heat externally) before it can heat the other.
Temperatures are more precise, because you are not prioritising one compartment over another.
The Flexi-temp is fully invertible: it can heat/heat, heat/cool, cool/heat or freeze/freeze in any combination in a suitably insulated vehicle (anywhere between 25°C to -25°C in ambients ranging from -20°C to 40°C).
Technical Specification
Below are the standard options for this refrigeration system. If you require something different, please call GAH on 01394 421140 to discuss your requirements with an application specialist.
| Type | Chilled | Frozen | Heat-Cool | Flexi | VLA |
|---|---|---|---|---|---|
| Pharma |
Applications & Compatabilities
Please note these guides are offered as an approximation only. For confirmation and a more detailed quotation, please contact one of our application specialists.
The FlexiTemp was initially designed for transporting pharmaceuticals, which could require any combination of temperatures in each compartment, for example, one at 5°C and the other at 20°C. Specialist couriers where goods of different temperature can be delivered and collected and which may require temperatures to be altered throughout the delivery run. It is also useful for spot hire companies where any temperature range could be required. Home delivery vehicles traditionally cool and freeze but, if an element of heat is required then a FlexiTemp would be ideal.
The FlexiTemp has been independently tested and shown to be able to cool in ambient temperatures of 40°C and provide heat in ambients as low as -20°C making it GDP compliant.
The FlexiTemp is suitable for medium to large panel vans (for example Iveco Daily, Ford Transit or Mercedes Sprinter). It can also be used on 3.5 – 7.5 tonne box body vans. Call GAH to discuss your application.
